CXD4.3Q

Features

Mã sản phẩm: CXD4.3Q

Thương hiệu:

QSC - MỸ

Xuất xứ:

Mỹ/Trung Quốc

Tình trạng:

Đặt hàng

Bảo hành:

12 tháng

Processing Amplifier

Giá bán: Liên hệ...

Số lượng

Hướng dẫn mua hàng

Làm việc, 8:30 - 17:30 Từ Thứ 2 đến thứ 6.

Tư vẫn - mua hàng

CXD4.2Q

CXD4.3Q

CXD4.5Q

Controls and indicators (front)

Power• Channel MUTE Buttons • Channel SELECT buttons • Channel input signal and CLIP LED indicators • Channel output and LIMIT LED meters • HOME, ENTER, EXIT, GAIN navigation buttons • Control knob

Controls and indicators (rear)

AC power disconnect

Rear panel connectors

Input: Four 3-pin Euroblock

Output: Four 2-pin Euroblock Speaker

Link/IO/Network: USB Type B; eight GPIO; NC & NO relay; two RJ45 (LAN A & LAN B)

Seamless Q-SYS integration with audio transport and control via standard Gigabit Ethernet protocols and hardware
Capable of providing up to 5,000 watts continuous and 8,000 watts peak with 70V or 100V direct drive available on each output of the CXD4.3Q and CXD4.5Q, and on bridged output pairs of the CXD4.2Q
Flexible Amplifier Summing Technology™ (FAST) permits total amplifier power to be distributed across one, two, three or all four channels
PowerLight universal switch mode power supply with PFC for highest efficiency, improved audio performance, and low weight
Mic/Line input Euroblock connectors and touch-proof Euroblock loudspeaker connections
Eight bi-directional GPIO connections that can be used for analog or digital inputs or outputs to/from Q-SYS
Built-in energy saving modes ensure that the amplifier will draw the minimum amount of AC power while still providing outstanding audio quality
Q-SYS technical support is available 24/7 - worldwide

	CXD4.2Q	CXD4.3Q	CXD4.5Q
Typical distortion	0.01 – 0.06%
Maximum distortion	1.00%
Frequency response	20 Hz–15 kHz ±0.2 dB 20 Hz–20 kHz +0.2/-0.7 dB
Noise Unweighted Weighted	-101 dB -109 dB
Gain (1.2V setting)	34.0 dB	38.4 dB	38.4 dB
Damping factor	>150
Input impedance	>10k ohm, balanced or unbalanced
Maximum rms input level (3.9V setting) (1.2V setting)	12.28 V (+24 dBu) 3.88 V (+14 dBu)
Amplifier and load protection	Short circuit, open circuit, thermal, RF protection. on/off muting, DC fault shutdown, active inrush limiting, input current limiting
AC power input	4.2: Universal Power Supply 100-132/200–240 VAC, 50–60 Hz
AC power input	4.3/4.5: Universal Power Supply 100–240 VAC, 50–60 Hz
Agency approvals	UL, CE, RoHS/WEEE compliant, FCC Class A (conducted and radiated emissions)
Carton contents	Locking IEC cable, Quick Start Guide, USB cable

		CXD4.2Q		CXD4.3Q		CXD4.5Q
		Max	Continuous	Max	Continuous	Max	Continuous
4 Independent Channels A, B, C, D	70V	N/A	N/A	500 W	500 W	1000 W	1000 W
	100V	N/A	N/A	625 W	625 W	1250 W	1250 W
	8Ω	500 W	400 W	900 W	625 W	1200 W	1150 W
	4Ω	700 W	400 W	1400 W	625 W	2000 W	1250 W
	2Ω	625 W	325 W	1200 W	625 W	1600 W	625 W
2 Channel BTL Bridged A+B or C+D Doubles Voltage	70V-4.2Q	1500 W	800 W	N/A	N/A	N/A	N/A
	100V-4.2Q	1200 W	800 W	N/A	N/A	N/A	N/A
	8Ω	1200 W	800 W	2400 W	1250 W	4000 W	2250 W
	4Ω	1500 W	600 W	NR*	NR*	NR*	NR*
	2Ω	NR*	NR*	NR*	NR*	NR*	NR*
2 Channel Parallel AB or CD Doubles Current	70V	N/A	N/A	1800 W	1150 W	2000 W	1800 W
	100V	N/A	N/A	1150 W	1150 W	1150 W	1150 W
	8Ω	500 W	400 W	1300 W	1150 W	1250 W	1150 W
	4Ω	950 W	800 W	2000 W	1250 W	2400 W	2250 W
	2Ω	1200 W	800 W	2500 W	1250 W	4000 W	2100 W
1 Channel 3CH Parallel ABC Triples Current	8Ω	500 W	400 W	1400 W	1150 W	1400 W	1150 W
	4Ω	950 W	800 W	2400 W	2000 W	2500 W	2400 W
	2Ω	1800 W	1200 W	3500 W	2500 W	4500 W	4100 W
1 Channel Bridged/Parallel AB+CD Doubles Current and Voltage	8Ω	1600 W	1500 W	3500 W	2500 W	4500 W	4200 W
	4Ω	2500 W	1600 W	5000 W	2500 W	7500 W	4200 W
	2Ω	NR*	NR*	NR*	NR*	NR*	NR*
1 Channel 4CH Parallel ABCD Quadruples Current	8Ω	500 W	400 W	1400 W	1150 W	1600 W	1150 W
	4Ω	1000 W	800 W	3000 W	2500 W	3000 W	2300 W
	2Ω	1700 W	1600 W	5000 W	2500 W	5300 W	4200 W

NR* = Not Recommended due to excessive current draw
BOLD = Optimal configuration fo the load and channel count