FIRENZE-KS7

Mã sản phẩm: FIRENZE-KS7

Thương hiệu:
K-ARRAY - Ý
Xuất xứ:
Ý
Tình trạng:
Đặt hàng
Bảo hành:
12 tháng
Màu sắc
  • Loa 2 x 21″
  • Ampli class D / 2 x 3500W @ 2Ω
  • Tần số: 25Hz – 120Hz
  • Max SPL: 141dB
Giá bán: Liên hệ...
Số lượng
Hướng dẫn mua hàng

HOTLINE: 0986.728.400

Làm việc, 8:30 - 17:30 Từ Thứ 2 đến thứ 6.
Tư vẫn - mua hàng

The 2 x 21” subwoofer features neodymium magnets with 6” voice coils driven by powerful Class D amplifiers. The large ports are designed to be fully symmetrical to the speakers, which means the back loading on the drivers is consistent and even with no port air turbulence.

The rear panel provides balanced analog and digital AES3 inputs and Ethernet connectivity for complete remote control over the fully-featured integrated DSP.

With the Firenze-KS7, gradient/cardioid configurations and end-fire arrangements are made easy with up to 2 seconds of input delay and frequency shaping. The Firenze-KS7 is an all-encompassing subwoofer that is capable of being employed as a single point source or in an arch array configuration.

General
Type Subwoofer
Frequency Response 25 Hz – 120 Hz (-10 dB)
Power Handling 7000 W
Sensitivity 99.5 dB (1 W / 1 m)
Maximum SPL 138 dB (cont.) – 141 dB (peak)
Crossover Internal DSP presets (120 Hz maximum)
Coverage Omni
Internal Processing
Input Sample Rate & Resolution Up to 96 kHz @ 24 bit with internal SRC and jitter correction
Built-in DSP Delay up to 2 s
Level and temperature remote monitoring
Internal Amplifier Module
Type 2-ch. switch mode, Class D
Peak Output Power 2 x 3500 W @ 2 Ω 1% THD+N
Operating Range 100-240V AC, 50-60 Hz with PFC
Power Consumption 600 W @ 4 Ω load, Pink noise 1/8 rated power
Protections Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection,
Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection
Mains Connector powerCON True with link inlet
Controls & Connectivity
Controls Remote control with dedicated PC software via ethernet connection
Connectivity Analog:
1x XLR (bal) input signal
1x XLR (bal) signal through
Digital:
1x XLR AES3
2x Ethercon for remote control
Handling
Dimensions (WxHxD) & Weight 1170 x 590 x 850 mm – 45.74 x 23.22 x 33.46 in
104.4 kg (230.16 lbs)
IP rating 20 (53 IP with K-AMPCOVER accessory)

Sản phẩm cùng loại

LYZARD-KZ1

Liên hệ...

LYZARD-KZ14

Liên hệ...

VYPER-KV25

Liên hệ...

KOBRA-KK102 I

Liên hệ...

PYTHON-KP102 I

Liên hệ...

KAYMAN-KY102

Liên hệ...

ANAKONDA-KAN200

Liên hệ...

CAPTURE-KMC20V

Liên hệ...

TRUFFLE-KTR25

Liên hệ...

RUMBLE-KU44

Liên hệ...

Đăng ký Email để nhận thông báo mới nhất

Copyright 2015 © www.duyhoaphat.vn. All rights reserved.

Loading... Loading ...